Toronto covers up to 80 per cent of the invoiced cost of a backwater valve, a sump pump, a battery backup, a plumbing assessment and the severing of an old foundation drain, up to a maximum of $6,650 per property. That $6,650 is not one pot of money. It is five separate caps added together, and knowing that changes the order you do the work in.
Most Toronto homeowners find out about the Basement Flooding Protection Subsidy Program after the water has already been in the basement, and most find out about it from a contractor who has an obvious interest in which device gets installed. This page sets out what the City actually pays, what disqualifies an application, and which of the two devices solves which problem, because they solve completely different ones.
Rather just talk?
(289) 207-6470Tell us your basement perimeter and current ceiling height and we can give you a realistic range on the call.
- A firm, itemized price up front
- Permits and engineering in the number
- The real timeline, honestly
Get a real range
Not a brochure. Tell us the basics and we will come back with numbers that reflect your actual foundation.
First, which problem do you have
This is the question that decides everything else, and it is answerable without anyone visiting your house.
Clear water on the floor is a groundwater problem. Dirty water coming up through a floor drain or a basement toilet is a sewer problem. A sump pump and a backwater valve each address exactly one of those, and neither one does anything about the other.
- Clear water, seeping at the wall or the wall-floor joint, worse after rain or snowmelt. This is groundwater finding a path through or under the foundation. The answers are grading, waterproofing, weeping tile and a sump pump to move the collected water out.
- Dirty or smelly water, rising up through a floor drain, shower drain or basement toilet, during heavy storms. This is the municipal sewer surcharging and backing up into your house. The answer is a backwater valve. Waterproofing does nothing for it.
- Water at a specific crack in the wall. That is a third thing again, and it is covered on the foundation crack page.
A sump pump gets water out of your basement. A backwater valve stops the sewer getting in. People buy one and expect it to do the other's job.
Parts of the old city sit on combined sewers, where sanitary and storm flows share one pipe. Those are the areas where a backwater valve is frequently the higher-value purchase of the two, because a summer cloudburst can surcharge the pipe faster than it can drain.
What the City actually pays, by category
These amounts apply to eligible work completed on or after November 12, 2025. Every line is 80 per cent of what you were invoiced, to the cap shown.
| Eligible work | Maximum subsidy | Notes |
|---|---|---|
| Backwater valve | $1,600 per device | Up to two devices, for homes with more than one sewer connection |
| Sump pump with alarm | $2,250 | Installation or replacement |
| Sump pump battery backup | $300 | Additional to the pump subsidy, retrofits included |
| Severing and capping the foundation drain | $400 | Where an old drain is being taken out of service |
| Home plumbing assessment | $500 | Added to identify internal plumbing causes |
Add the caps up and you get $6,650, which is the figure the City quotes as the maximum per property. The arithmetic matters, because the City states that a property has a lifetime maximum for each type of eligible work, not one shared balance. A property that claimed a sump pump years ago has used its sump pump allowance, and still has its backwater valve allowance sitting untouched.
If a previous owner claimed under this program, that history follows the property, not the person. The City will tell you what a given address has already drawn against. Ask before you plan the work, not after the invoice is paid.
The four things that disqualify an application
The money is real and the refusals are almost always procedural rather than technical. Four conditions catch most people.
- Your downspouts must be disconnected from the City's sewer system, or you must hold a written exemption. Downspout disconnection is mandatory for all property owners in Toronto, and the disconnection work itself is not eligible for a subsidy. Exemptions exist where disconnection is hazardous or not technically feasible, but the City expects you to have tried relocating the downspout or correcting the grading first, and it reserves the right to revoke an exemption granted on inaccurate information.
- The contractor needs a valid City of Toronto business licence at the time of installation. Not at the time you apply. At the time the work was done.
- You have two years from completion of the work to apply. Work completed before November 12, 2025 fell under a one-year window and lower caps.
- Only the registered owner can apply, and only for a single-family, duplex, triplex or fourplex residential property.
The backwater valve needs a building permit
This is the condition people miss, and it is the one that cannot be fixed after the fact. Installing a backwater valve requires a building permit from the City, and the subsidy is conditional on it. A plumber who tells you a permit is unnecessary for a valve is either wrong or is quoting you a job that will not qualify for the $1,600.
The permit matters for a second reason that has nothing to do with the subsidy. A backwater valve sits in the building drain and has to remain accessible for cleaning and inspection for the rest of the building's life. A valve buried under a finished floor with no access cover is a valve nobody will ever service, and an unserviced valve is one that eventually fails open, closed, or noisily.
What this costs here before the subsidy
We coordinate the work and we do not perform it, so these are the ranges the Toronto market has been running, not a quote.
| Work | Typical Toronto range |
|---|---|
| Backwater valve, normal access through the slab | roughly $2,500 to $4,500 |
| Backwater valve, awkward access or deep building drain | roughly $4,500 to $7,000 |
| Sump pit and pump, new installation | roughly $2,500 to $5,000 |
| Pump replacement in an existing pit | roughly $800 to $1,800 |
| Battery backup system | roughly $700 to $1,500 |
At the top of those ranges the subsidy still only pays 80 per cent to the cap, so a $5,000 valve returns $1,600, not $4,000. The cap, not the percentage, is what usually binds. Ask for the invoice to be itemised by eligible category, because a single lump-sum invoice for "basement flood protection" gives the City nothing to assess line by line.
Do it while the basement is open
If the basement is being underpinned or lowered, the slab is coming out anyway. A sump pit and a backwater valve both live under that slab.
Cutting a slab, trenching to the building drain, tying in and repouring is most of the labour on both jobs. When that work is already scheduled and paid for as part of the excavation, the marginal cost of adding a pit or a valve is a fraction of the standalone price, and the subsidy applies either way. Doing it two years later means breaking a floor you have just paid to pour and finish.
The same logic runs the other way as a warning. A deepened basement sits lower relative to the sewer and the water table than the one it replaced, which is exactly the situation where drainage that was adequate before is not adequate afterwards. Lakeside pockets of the city, like the Beaches, show this most clearly, but it is not only a lakeshore problem.
A quote for a basement lowering that says nothing about the sump pit, the backwater valve or where the water goes is not a cheaper quote. It is a quote that has left a drainage decision to be discovered after the concrete is down.
What we do and what we do not
We coordinate the trades and the engineering that a basement project needs, and we do not perform plumbing, engineering or structural work ourselves. We will not tell you over the phone whether your house needs a valve, a pump or both, because that depends on what your building drain looks like and which way the water came in. What we can do is make sure the permit, the licensed contractor and the itemised invoice are lined up so the subsidy is claimable rather than lost on a technicality.
If the reason you are reading this is that you are also thinking about headroom, the honest cost comparison is on the is it worth it page, and what living through the work is actually like is on the disruption page.
Common questions
Does a backwater valve need a building permit in Toronto?
Yes. The City requires a building permit to install a backwater valve, and the subsidy is conditional on having obtained one. A quote that skips the permit is a quote that will not qualify.
How much does the City pay for a backwater valve?
Up to 80 per cent of the invoiced cost to a maximum of $1,600 per device, for up to two devices where the property has more than one sewer connection.
How much does the City pay for a sump pump?
Up to 80 per cent of the invoiced cost to a maximum of $2,250 for the pump with an alarm, plus up to $300 for a battery backup, including retrofits to an existing pump.
What is the maximum basement flooding subsidy in Toronto?
$6,650 per property, which is the sum of the individual caps: $1,600 per backwater valve for up to two, $2,250 for a sump pump, $300 for a battery backup, $400 for severing and capping a foundation drain, and $500 for a home plumbing assessment. Each category carries its own lifetime maximum for the property.
Do I have to disconnect my downspouts to qualify?
Yes, or hold a City exemption. Downspout disconnection is mandatory across Toronto, and the disconnection work itself is not eligible for a subsidy.
How long do I have to apply?
Two years from completion, for work completed on or after November 12, 2025. Work completed before that date fell under a one-year window and lower amounts.
Do I need a sump pump if I have a backwater valve?
They solve different failures. The valve stops sewer backup; the pump removes groundwater that has collected in a pit. Whether you need one, the other or both depends on where your water is coming from and what your existing drainage looks like.
Can I claim if a previous owner already claimed?
The lifetime maximum attaches to the property for each category of work, so a claim made by a previous owner uses up that category. Categories not previously claimed remain available. The City can confirm a specific address's history.
Will a backwater valve stop my basement leaking at the wall?
No. Water at the wall or the wall-floor joint is groundwater, and that is a grading, drainage and waterproofing question rather than a sewer one.
Rather just talk?
(289) 207-6470Tell us your basement perimeter and current ceiling height and we can give you a realistic range on the call.
- A firm, itemized price up front
- Permits and engineering in the number
- The real timeline, honestly
Get a real range
Not a brochure. Tell us the basics and we will come back with numbers that reflect your actual foundation.