If a basement walkout, an exterior waterproofing trench or any dig for an underpinning project will injure or remove a protected tree, you need a City of Toronto tree permit before you start, and on a ravine lot a Ravine and Natural Feature Protection permit as well. The Private Tree By-law protects any private tree 30 centimetres in diameter or more measured 1.4 metres above the ground, "injure" includes cutting roots during excavation, and as of September 1, 2026 a new Distinctive Tree category adds protection for trees over 61 centimetres across. Get the tree measured and the protection zone drawn before anyone prices the stairwell.
That is the page in one paragraph. The rest explains which trees are protected after the September 2026 changes, when a basement dig counts as injuring a tree, how the tree permit sits alongside the building permit and the TRCA permit, what the City charges, and how to sequence it so a tree does not stop a walkout the week the crew arrives. Every rule below was checked on the City of Toronto's own pages on November 15, 2026.
We coordinate underpinning, lowering and walkout projects and the approvals they need. We do not perform structural engineering, we are not arborists, and we will not tell you a tree can be removed or a root can be cut. The City's Urban Forestry staff and a qualified arborist decide that. We make sure the tree question is answered before the dig is designed, not after.
Rather just talk?
(289) 207-6470Tell us your basement perimeter and current ceiling height and we can give you a realistic range on the call.
- A firm, itemized price up front
- Permits and engineering in the number
- The real timeline, honestly
Get a real range
Not a brochure. Tell us the basics and we will come back with numbers that reflect your actual foundation.
What changed on September 1, 2026
Toronto amended its tree by-laws effective September 1, 2026, tightening protection and changing the fees. The amendments touch two parts of the Municipal Code: Chapter 813, the Private Tree By-law, and Chapter 658, the Ravine and Natural Feature Protection By-law. For a basement project the changes that matter are these:
- A new Distinctive Tree category. Large, healthy trees on private property and in ravines that are more than 61 centimetres in diameter, roughly the size of a car tire, are now identified by City staff and given extra weight when someone applies to injure or remove them.
- A stump measurement rule. A stump of 40 centimetres in diameter or more can be used as a secondary measurement when a removed tree's trunk can no longer be measured, which closes the gap where a tree was cut before anyone checked its size.
- Newly planted trees are protected regardless of size. A replacement tree you planted does not have to reach 30 centimetres before the by-law covers it.
- Diameter-based replacement ratios. Replacement planting for a contravention now starts at 5 to 1 and rises for larger trees, instead of a flat ratio.
- New ravine and natural feature permit fees, listed below.
The 30 centimetre private tree threshold did not drop. City Council endorsed lowering it from 30 centimetres to 20 centimetres, but that change is deferred to a report due in 2027, so on a project you price today the number to measure against is still 30 centimetres.
Which trees are protected
Three separate by-laws can protect the tree beside your dig, and a single lot can sit under more than one.
| By-law | Code | What it protects | Permit trigger for a dig |
|---|---|---|---|
| Private Tree By-law | Chapter 813 | A private tree 30 cm or more in diameter at 1.4 m; any newly planted tree; Distinctive Trees over 61 cm | Injuring or removing the tree, including root cutting |
| City tree protection | Chapter 813 | Every tree on a City street, boulevard or park, regardless of size | Any injury or removal |
| Ravine and Natural Feature Protection | Chapter 658 | Any tree of any size inside a designated ravine or protected area, plus the slope and soil | Injury, removal, grade change, fill or a new structure |
The practical reading for a basement job: on a flat interior lot, the question is whether a protected private tree or a City boulevard tree is close enough to the excavation that its roots will be cut. On a ravine, creek or valley lot, the question is broader, because the ravine by-law protects every tree and the grade itself, and the dig, the regrading and the retaining walls are all captured. The ravine lines and how they are drawn are set out on our page on TRCA permits for underpinning and walkouts; the City's ravine by-law is a second, municipal layer on top of the provincial TRCA permit.
Why a basement dig "injures" a tree
The word that catches most homeowners is "injure." The by-law does not only stop you from cutting a tree down. It protects a protected tree from damage, and a root is part of the tree. A walkout stairwell dug three metres from a mature maple, an exterior waterproofing trench run along the foundation past a neighbour's tree, or an areaway cut for a new side entrance can all sever structural roots without a saw ever touching the trunk.
That is why the City works in tree protection zones. Before protected work starts, the zone around a tree is fenced with hoarding, and excavation, grade change and stored material are kept out of it. The City sets a minimum protection distance that grows with the trunk's diameter and starts at 1.2 metres for the smallest trees, and Urban Forestry can require a larger zone depending on the tree and the site. Where a dig has to come inside the zone, the permit and an arborist's plan control how, often with hand digging or root pruning supervised by the arborist rather than a machine.
We do not promise that a walkout can be dug at a given distance from a tree, and we do not decide whether a root can be cut. The arborist measures the tree and sets the zone, and the engineer designs the shoring and the stair around it. Our job is to get both of them looking at the tree before the excavation is drawn.
This is also where the exterior waterproofing decision interacts with the trees. A full exterior dig along a foundation, covered on our page on basement waterproofing in Toronto, is the kind of trench that runs straight through a tree protection zone, while an interior drainage system may avoid it. The tree can be the reason the method changes.
How the tree permit fits with the building permit
The tree permit is its own approval, from Urban Forestry, separate from the building permit that the walkout or underpinning itself needs. They run in parallel, but the building side expects the tree question to be answered. The City's Residential Basement Entrances guide asks for a Tree Declaration form on any project where there is a potential for damage to a private or City tree, which on a lot with a mature tree near the foundation is most of them. A declaration that trees are present and protected sends you to the tree permit before the building permit can clear.
On a ravine lot the order is stricter still. The City will not approve a grade change under the ravine by-law without evidence that the conservation authority has issued its permit first, so the sequence becomes TRCA permit, then City ravine and tree permits, then the building permit. That full stack, and the City building permit fee of $12.37 per linear metre that sits at the end of it, is on our page on underpinning permits in Toronto. None of that permit clock starts until the tree and ravine questions are settled.
For the walkout itself, the stair placement, the retaining walls and the single line about trees it currently carries are on our main page on basement walkouts in Toronto. This page is the long version of that one line.
What the City charges
The Ravine and Natural Feature Protection fees changed on September 1, 2026. The City's published amounts, per tree, are:
| Ravine permit category | Fee |
|---|---|
| Ravine tree, construction | $262.72 per tree |
| Ravine boundary or neighbour tree, construction | $549.08 per tree |
| Ravine tree, non-construction | $87.57 per tree |
| Ravine boundary or neighbour tree, non-construction | $183.03 per tree |
| Alteration of grade, no trees | $632.51 per application |
A ravine-lot walkout that touches two ravine trees and regrades the slope is therefore several hundred to over a thousand dollars in tree and grade fees on its own, before the building permit. The Private Tree By-law permit under Chapter 813 is a separate application with its own fee set by the City's schedule. We do not fold any tree fee into our own published ranges, because the City sets them and they depend on how many trees and which category.
What we do when a tree is in the way
Our part is coordination, in this order:
- Spot the trees before the first drawing. On the site visit we note any private tree that looks near the 30 centimetre mark, any boulevard tree, any neighbour's tree whose canopy or roots reach the dig, and whether the lot is in a ravine protected area.
- Get the arborist in early. An arborist measures each tree, sets the protection zone, and says whether the planned excavation can stay out of it or needs root pruning and hand digging. That answer can move the stair.
- Brief the engineer with the zone in hand. The shoring, the stair and the retaining walls are designed around the protection zone and the slope, not redrawn after a permit is refused.
- Sequence the permits. Tree and ravine permits go in alongside the TRCA application where one is needed, and the building permit follows with all of it attached.
- Keep the hoarding honest. The protection fencing goes up before excavation and stays up, because a cut root found mid-project is the expensive way to learn the zone was real.
What we do not do: tell you a protected tree can come down, promise a dig distance before the arborist has measured, or quote a tree fee. Our published ranges, $15,000 to $30,000 for a walkout and $1,500 to $8,000 for engineering, are the starting frame; the tree permit, the arborist's time and any replacement planting sit outside them.
Common questions
Do I need a tree permit to build a basement walkout in Toronto?
You need one if the excavation will injure or remove a protected tree, and a walkout dig often does. Under the Private Tree By-law a permit is required to injure or remove a private tree 30 centimetres in diameter or more, measured 1.4 metres above the ground, and injuring includes cutting roots during excavation. On a designated ravine lot the Ravine and Natural Feature Protection By-law needs a permit for any tree of any size, plus the grade change. Measure the trunk and the distance to the dig before the stair is placed.
What size of tree is protected on private property in Toronto?
Under the City's Private Tree By-law, Municipal Code Chapter 813, a permit is required to injure or remove a private tree measuring 30 centimetres in diameter or more at 1.4 metres above the ground. City Council has endorsed lowering that threshold to 20 centimetres, but that change is deferred to a 2027 report, so 30 centimetres still applies as of September 1, 2026. Trees you have newly planted are now protected regardless of size.
What is a Distinctive Tree under the September 2026 changes?
Effective September 1, 2026, the City added a Distinctive Tree category for large, healthy trees on private property and in ravines that are more than 61 centimetres in diameter, roughly the size of a car tire. Distinctive Trees are identified by City staff and must be given extra weight when a permit application is made to injure or remove them. A stump of 40 centimetres or more can be used as a secondary measurement when a removed tree's trunk cannot be measured.
Do I need a permit if the tree is on my neighbour's land or the City boulevard?
Yes. A protected tree on a neighbour's property whose roots or branches your excavation would injure is covered, and a boundary tree needs both owners' involvement. Every tree on a City street or boulevard is protected regardless of size, and the City treats a ravine boundary or neighbour tree as its own fee category. A walkout dug tight to a side lot line is the common case where a neighbour's tree sets the design.
How much does a Toronto tree or ravine permit cost?
The City's Ravine and Natural Feature Protection fees that took effect September 1, 2026 are $262.72 per ravine tree for construction and $549.08 per ravine boundary or neighbour tree for construction, $87.57 and $183.03 for non-construction, and $632.51 for an alteration of grade with no trees. The Private Tree By-law permit is a separate application under Chapter 813. We quote no tree fee as part of our own ranges; the City sets them.
Can I excavate near a protected tree without removing it?
Only inside a tree protection zone the City accepts, and often only with a permit, because the by-law protects a tree from injury, not just removal, and cutting roots during a dig is injury. The City sets a minimum protection distance that grows with the trunk's diameter, starts at 1.2 metres for the smallest trees, and Urban Forestry can enlarge it. Excavation, grade change and stored material inside that zone are what the permit and the arborist's plan control.
What happens if I injure a protected tree without a permit?
The City can fine the owner and require replacement planting, and from September 1, 2026 the replacement ratios are diameter-based, starting at 5 to 1 and increasing for larger trees. Unpermitted work also surfaces at resale, since a buyer or their lawyer can find an open file or a violation. The honest sequence is to have the tree measured and the protection zone drawn before the walkout or the waterproofing trench is priced.
Call (289) 207-6470 if there is a mature tree near where your walkout, side entrance or exterior waterproofing has to go, or send the address below. We will flag the tree and ravine questions, get an arborist to measure the protection zone, and sequence the permits before anyone draws or prices the dig.
Rather just talk?
(289) 207-6470Tell us your basement perimeter and current ceiling height and we can give you a realistic range on the call.
- A firm, itemized price up front
- Permits and engineering in the number
- The real timeline, honestly
Get a real range
Not a brochure. Tell us the basics and we will come back with numbers that reflect your actual foundation.