Home / Basement Window Enlargement in Toronto: Egress, Lintels and Permits

Basement Window Enlargement in Toronto: Egress, Lintels and Permits

Reviewed November 2026 · Toronto & the GTA

Typical cost$3,000 – $7,000enlarged egress window with a well, installed; lintel and drainage quoted after the engineer's design
ResultsCheapest cut with the loweringrush available
Best forMaking a below-grade room a legal bedroom or second-suite bedroom

Enlarging a basement window in Toronto means cutting a bigger opening in the foundation wall, setting a new lintel over it, and usually digging a window well below grade. It is structural work, not a window swap: the City of Toronto lists "enlarging or relocating existing windows or doors" as permit-required, a licensed engineer sizes the lintel, and the reason most people do it is to give a below-grade bedroom the emergency escape window the Ontario Building Code demands. An enlarged egress window with a well runs about $3,000 to $7,000 installed in the Toronto market.

That price and that paragraph settle most of the question, but not the part that trips people up. Replacing the glass in the hole that is already there needs no permit. Making the hole bigger does, because you are altering the structure of a wall that holds the house up. This page covers why the enlargement happens, the exact egress numbers the Code asks for, who designs the lintel, what the City requires, and how the opening gets cut, including when it is done at the same time as basement lowering in Toronto.

We coordinate the opening, the engineer, the permit and the contractor. We do not perform structural engineering. The lintel size, the bearing at each end and whether your wall can take a wider opening are a licensed Ontario engineer's design, never this page, and we will not tell you over the phone that your wall is fine to cut.

Rather just talk?

(289) 207-6470

Tell us your basement perimeter and current ceiling height and we can give you a realistic range on the call.

  • A firm, itemized price up front
  • Permits and engineering in the number
  • The real timeline, honestly
Call now

Get a real range

Not a brochure. Tell us the basics and we will come back with numbers that reflect your actual foundation.

No obligation. Your details go only to our Toronto team.

Why you enlarge a basement window

Almost every enlargement in Toronto comes back to one goal: making a basement room a legal bedroom, usually as part of a legal basement apartment in Toronto or a second suite. A room used for sleeping has to have a way out in a fire that does not depend on the stairs, and in a finished basement the original windows are the problem on two counts at once.

The first is size. Houses built before the 1990s across the east end, from the pre-war semis of Leslieville and Riverdale to the post-war bungalows of Scarborough and North York, have small basement windows, often a short sliding unit or a hopper tucked up near the joists. They were built to let a little light into an unfinished cellar, not to let a person climb out. They do not come close to the open area the Code wants.

The second is the sill. A basement window sits high in the wall because most of the wall is below grade. To put a compliant escape window low enough to climb through, and to get daylight to it, you cut the opening down into the foundation and build a window well on the outside to hold the earth back. That is the enlargement. The glass is the small part; the opening and the well are the job.

The point

If a basement room is going to be a bedroom, the escape window is not optional and it is not a formality. It is the single item that most often decides whether the City will sign off the suite.

Light and resale are real secondary reasons. A proper egress window changes how a basement feels and how it shows, and a buyer's agent looking at a finished lower level will ask whether the bedrooms are legal. But the driver is nearly always the Code.

What the Ontario Building Code asks for

The requirement lives in the Ontario Building Code at article 9.9.10.1, "Egress Windows or Doors for Bedrooms". We read it this month in the City of Markham's Builder Tip No. 83 (updated to the 2024 Code) and the City of Ottawa's Building Code Services advisory, both of which reproduce the Code's own wording. Every floor level that contains a bedroom in a suite needs at least one outside window that:

  • is openable from the inside without the use of tools,
  • provides an individual, unobstructed open portion of at least 0.35 m² with no dimension less than 380 mm, and
  • holds that opening without needing anything to prop it.

Two numbers do most of the work there. 0.35 square metres is roughly 3.8 square feet, and no side of the clear opening can be under 380 mm, about 15 inches. A 380 mm by 380 mm square does not pass, because it does not reach the area, so a compliant unit is taller or wider than it first looks. For a sliding window, the minimum applies to the openable half, not the whole frame, which is why a slider usually has to be larger again.

Then the sill and the well:

  • The window's maximum sill height is 1000 mm above the floor, except for basement areas. The Code writes the basement exception in because basement sills are often higher, which is exactly the condition that drives an enlargement.
  • Where the window opens into a window well, there must be a clearance of not less than 550 mm in front of the window so a person can get through and out. If a sash swings toward the well, it cannot cut into that clearance.
  • A cover or grate over the well has to be openable from the inside without keys, tools or special knowledge. Where the well is more than about a metre deep, a way of assisting the climb out is needed.

There is also a fall-protection layer. The Ottawa advisory notes that openable windows in a dwelling unit need a guard, a restrictor, or a sill above 900 mm, while windows whose sill is less than 1800 mm above the outside grade are exempt from the guard and restrictor rules under Code article 9.8.8.1. A basement egress window with a well usually sits inside that exemption, but the designer confirms it for your house rather than assuming it.

These are the figures the inspector measures against. They are not ours to waive or to stretch, and a contractor who promises a "legal" window without drawings that show the clear opening is promising something the City has not seen.

Enlarging is structural, and that is the whole permit question

Here is the distinction that saves or costs people a permit. The City of Toronto's When Do I Need a Building Permit? page, read at source this session, says a building permit is needed for "structural or material alterations", for "new windows or doors where there were none before", and specifically for "enlarging or relocating existing windows or doors". The exemption is narrow and precise: replacing a window or door is permit-free only "in an existing opening... if the opening's location and size don't change, the structural support is unaffected, and no new exit is created".

Read those together and the line is clear. Swap glass in the same hole, no permit. Make the hole bigger, permit, every time, because you have changed the structure and created a new exit. The same page lists finishing a basement as permit-required when it includes structural alterations, a basement entrance or a second suite, so the egress window usually arrives inside the suite permit rather than on its own.

The structural piece is the lintel. When you widen an opening in a foundation wall, the load above the window that used to pass through solid wall now has to be carried across the gap and down each side. In a Toronto house that wall is one of three things, and each changes the job:

Wall What the enlargement involves
Poured concrete (most houses 1950s onward) Saw-cut the opening, set a steel lintel the engineer sizes, confirm bearing at each end
Concrete block (many post-war houses) Cut and rebuild around a lintel; the hollow block needs proper bearing, sometimes filled cores
Rubble stone and lime mortar (pre-1920 houses) A different case entirely; the wall is not uniform and has no separate footing, see rubble stone foundations in Toronto

In every case the lintel is designed by a licensed Ontario engineer, and in an older or rubble wall the engineer looks at the enlargement the same way they look at an underpinning cut, because taking a wide bite out of a stone wall can be the more delicate job. What the engineer does on these projects, and roughly what it costs, is on our page about the underpinning engineer in Toronto.

The window well, the drainage and the cover

The well is not just a retaining ring. It holds earth off the glass, and it has to shed water or it becomes a bucket against the foundation. A well with no drainage fills in a storm and pushes water at the opening you just cut, which is the opposite of what the suite needs.

A proper well connects its base to the foundation drainage so water that collects runs away rather than ponding. If you are already opening the ground for the well, it is the moment to look at the rest of the drainage, and our page on basement waterproofing in Toronto covers how the weeping tile and the sump fit together. The cover over the well has to keep the opening usable from inside, which rules out a bolted-down grate, and on a deeper well the Code wants a way to help an occupant climb out.

Enlarged egress window or a walkout

An enlarged egress window is the lower-cost way to make a basement bedroom legal and bring in light. It does not give the lower level its own entrance. Where the basement is becoming a self-contained suite that needs a separate door, a basement walkout in Toronto is the larger project, commonly $15,000 to $30,000 against the window's $3,000 to $7,000. The walkout page carries the full side-by-side so you can see which one your plan actually needs. Choose the window when the goal is egress, light and cost control; choose the walkout when the suite needs its own way in and out.

What it costs in Toronto

The published figure for an enlarged egress window with a well in the Toronto market is $3,000 to $7,000 installed. That is the number we stand behind on this site, and we do not quote a firm total, because the final price turns on the wall, the depth and the ground. What we can show is which way each condition pushes:

Condition Toward the lower end Toward the higher end
Wall type Poured concrete, clean saw cut Block to rebuild, or rubble stone
Opening size Modest widening for a code-minimum window Large opening for a wide or taller unit
Well depth Shallow well near grade Deep well needing retaining and egress assistance
Drainage Tie into existing, working weeping tile New drainage, pumped, or poor existing ground
Access Open side or rear yard Tight side yard next to a neighbour's wall

The lintel, the well and the drainage are quoted after the engineer's design, and the City permit fee is separate. When the window is cut as part of a lowering, the underpinning rate of $500 to $750 per linear foot and the permit fee of $12.37 per linear metre (with a $214.79 minimum) are on the underpinning permits in Toronto page; the window itself stays inside its own $3,000 to $7,000 range. If you are weighing two quotes, our page on comparing underpinning quotes has the line items to ask each contractor to show.

When the window is cut with the lowering

If you are already underpinning or lowering, the egress window is cheapest and cleanest to cut then. The wall is exposed, the engineer is already on the drawings, the ground outside is often open for the well, and the permit already covers structural work. Doing it later means opening finished ground and finished wall a second time. We raise the window question at the first site visit for the same reason we raise the beam: the cost of leaving it to the end is a second mobilisation, not a smaller bill.

Common questions

Does enlarging a basement window need a permit in Toronto?

Yes. The City lists "enlarging or relocating existing windows or doors" as permit-required, and treats a new or widened opening as a structural alteration. Replacing a window is exempt only when the opening's location and size do not change and the structural support is unaffected. Enlarging changes both.

What size does an egress window have to be?

Ontario Building Code article 9.9.10.1 requires at least one window in a floor level with a bedroom to give an unobstructed opening of at least 0.35 square metres with no dimension under 380 mm, openable from inside without tools. A 380 mm square does not meet the area, so the real window is larger.

Can any basement window be enlarged?

Most can, but it is the engineer's call, not ours. It depends on the wall, how wide the new opening is, what sits above it and the condition of an older or rubble foundation. The engineer designs the lintel and confirms the wall can take the opening before anyone cuts.

How much does an enlarged egress window cost in Toronto?

An enlarged egress window with a well is commonly $3,000 to $7,000 installed. We do not quote a firm total, because the wall type, the opening size, the well depth and the drainage all move it. The lintel and well are priced after the engineer's design.

Do I need an engineer, or just a window company?

You need both. A window company sets the unit; a licensed Ontario engineer sizes and details the lintel and confirms the opening, which is the structural part the City permits. We coordinate the engineer, the permit and the installer.

Does the window well need a drain?

A well should tie into the foundation drainage so it does not fill and push water at the new opening. A cover has to open from the inside, and a deep well needs a way to help a person climb out. The drainage detail is part of the design.

Is a walkout better than an egress window?

It depends on the goal. A walkout gives the basement its own entrance and costs more, commonly $15,000 to $30,000. An egress window gives light and a legal escape for a bedroom at $3,000 to $7,000 but no separate entrance. The walkout page has the full comparison.

Call (289) 207-6470 with the age of your house, the wall type if you know it, and whether the room is becoming a bedroom or a full suite, or send the details below, and we will tell you whether the window is a straightforward enlargement or a job the engineer needs to look at in person, and what the drawings will have to show.

Rather just talk?

(289) 207-6470

Tell us your basement perimeter and current ceiling height and we can give you a realistic range on the call.

  • A firm, itemized price up front
  • Permits and engineering in the number
  • The real timeline, honestly
Call now

Get a real range

Not a brochure. Tell us the basics and we will come back with numbers that reflect your actual foundation.

No obligation. Your details go only to our Toronto team.

Know the number before you dig.

Tell us your perimeter and current height. We will give you a realistic range, not a brochure.

Call (289) 207-6470
Call nowGet a range